FEBOND BLUE GRIT 10 LITRE

FEBOND BLUE GRIT 10 LITRE is a one coat high performance plaster bonding agent specifically designed to provide an improved key to smooth surfaces.

Containing a fine aggregate FEBOND BLUE GRIT provides a mechanical key to backgrounds such as plaster, concrete, painted surfaces and glazed tiles.

Blue Grit continues to be an essential asset in your arsenal of surface preparation adhesion enhancing solutions.

Bond Strength tested in accordance withEN13892-8.

TRANSFORM THE TRICKIEST SURFACES WITH BLUE GRIT

1. Strong Bonding: Blue Grit ensures your projects last with its reliable bonding strength.
2. Versatile: From glass to particle boards, Blue Grit works on various surfaces.
3. Dual-Purpose: Simplify your tasks – Blue Grit acts as both a primer and sealer.
4. Tested Performance: Meets the highest standards, delivering consistent results.

Typical Uses

• Feb Bond Blue Grit is ideal as a bonding coat for walls prior to plastering, for bonding to difficult substrates such as glass, ceramics, Plastic Laminates,
• MR plasterboard, MDF, pre-cast concrete, and other particle boards even glass.

Features and Benefits

• Provides mechanical Key - Enables plastering over low suction and smooth backgrounds.
• Easy to Apply - Apply Blue Grit effortlessly by brush or roller.
• Blue colour gives easy identification of area covered.
• Efficient - Save time and effort with Blue Grit's one-coat application.
• Easy to Spot - Blue Grit's blue colour makes it easy to see where it's applied
• Simple to apply by roller or brush.
• Ready to use straight from the tub.
• Do not thin.

Instructions For Use

• Preparation of Substrate
• Ensure substrate is dust, release agent and frost free and is suitable to provide sufficient support.

Application

1. Stir well before use and use 1 coat only
2. Ensure ambient and surface temperature is above 5 Deg C
3. Apply using a short pile roller or brush to give an even coating.
4. Feb Bond Blue Coat is coloured blue to help avoid missing any areas.
5. Protect adjacent surfaces from splashes and remove any before drying with warm soapy water.
6. Allow to dry thoroughly before applying plaster usually 24 hours minimum.